In geology, permeability is a measure of the ability of a material (typically, a rock or unconsolidated alluvial material) to transmit fluids through it. It is of great importance in determining the flow characteristics of hydrocarbons in oil and gas reservoirs, and of groundwater in aquifers. The usual unit for permeability is the darcy, or more commonly the milli-darcy or md (1 darcy = 1 x 10-12.m2).
Permeability is the proportionality constant in Darcy's law which relates discharge (flow rate) to a pressure gradient applied to the porous media. In naturally occurring materials, it ranges over many orders of magnitude (see table below for an example of this range).
For a rock to be considered as an exploitable hydrocarbon reservoir, its permeability must be greater than approximately 100 md (depending on the nature of the hydrocarbon - gas reservoirs with lower permeabilities are still exploitable because of the lower viscosity of gas with respect to oil). Rocks with permeabilities significantly lower than 100 md can form efficient seals (see petroleum geology). Unconsolidated sands may have permeabilities of 5000+ md.
Ranges of intrinsic permeability (κ) values found in nature
| Relative Permeability
| Pervious
| Semi-Pervious
| Impervious
|
| Unconsolidated Sand & Gravel
| Well Sorted Gravel
| Well Sorted Sand or Sand & Gravel
| Very Fine Sand, Silt, Loess, Loam
|
|
| Unconsolidated Clay & Organic
|
| Peat
| Layered Clay
| Fat / Unweathered Clay
|
| Consolidated Rocks
| Highly Fractured Rocks
| Oil Reservoir Rocks
| Fresh Sandstone
| Fresh Limestone, Dolomite
| Fresh Granite
|
| κ (cm²)
| 0.001
| 0.0001
| 10−5
| 10−6
| 10−7
| 10−8
| 10−9
| 10−10
| 10−11
| 10−12
| 10−13
| 10−14
| 10−15
|
| κ (milliDarcies)
| 10+8
| 10+7
| 10+6
| 10+5
| 10,000
| 1,000
| 100
| 10
| 1
| 0.1
| 0.01
| 0.001
| 0.0001
|
Source: modified from Bear, 1972
See also
Reference
- Bear, Jacob, 1972. Dynamics of Fluids in Porous Media, Dover. — ISBN 0486656756